The Ktwo Evo range of twin vertical beater rear discharge manure spreaders are designed to cope with the most demanding conditions whilst at the same time providing extra accuracy and the highest outputs available. Capable of spreading a wide range of materials from sludge products to chicken litter, these spreaders offer a versatility and build quality that is unique to the Ktwo Evo. Available in capacities of 14–38 tonnes (21.5–45.4 m3) and with a range of optional extras, these machines also feature an enhanced standard specification.
Evo Range
Evo 1400
21.5 cubic metre capacity
1.60m wide body
10 stud Commercial axle with 420x180mm brakes
4 x 16mm marine chains – 128 tonne breaking strain
75mm diamater floor drive shaft with 6 tooth sprockets
580/70 R38 wheels
Evo 1600
23.5 cubic metre capacity
1.60m wide body
10 stud Commercial axle with 420x180mm brakes
4 x 16mm marine chains – 128 tonne breaking strain
75mm diamater floor drive shaft with 6 tooth sprockets
580/70 R38 wheels
Evo 1800
25.4 cubic metre capacity
1.60m wide body
10 stud Commercial axle with 420x180mm brakes
4 x 16mm marine chains – 128 tonne breaking strain
75mm diamater floor drive shaft with 6 tooth sprockets
620/6570 R42 wheels
Evo 2400 TANDEM
21.5 cubic metre capacity
1.60m wide body
10 stud Commercial axles with 420x180mm brakes
4 x 16mm marine chains – 128 tonne breaking strain
75mm diamater floor drive shaft with 6 tooth sprockets
560/60 R22.5 wheels
Evo 2600 TANDEM
23.5 cubic metre capacity
1.60m wide body
10 stud Commercial axles with 420x180mm brakes
4 x 16mm marine chains – 128 tonne breaking strain
75mm diamater floor drive shaft with 6 tooth sprockets
560/60 R22.5 wheels
Evo 2800 TANDEM
25.4 cubic metre capacity
1.60m wide body
10 stud Commercial axles with 420x180mm brakes
4 x 16mm marine chains – 128 tonne breaking strain
75mm diamater floor drive shaft with 6 tooth sprockets
560/60 R22.5 wheels
Evo 3800 TRI AXLE
30.1 cubic metre capacity
1.60m wide body
10 stud Commercial axles with 420x180mm brakes
4 x 16mm marine chains – 128 tonne breaking strain
75mm diamater floor drive shaft with 6 tooth sprockets
560/60 R22.5 wheels
Evo 2620 TANDEM
29.7 cubic metre capacity
2m wide body
10 stud Commercial axles with 420x180mm brakes
4 x 16mm marine chains – 128 tonne breaking strain
75mm diamater floor drive shaft with 6 tooth sprockets
710/50 R26.5 wheels
Evo 3820 TRI AXLE
36.3 cubic metre capacity
2m wide body
10 stud Commercial axles with 420x180mm brakes
4 x 16mm marine chains – 128 tonne breaking strain
75mm diamater floor drive shaft with 6 tooth sprockets
710/50 R26.5 wheels
Standard specifications
Rotors
- Large 965mm diamater rotors
- Botoom spinner paddles with 1,250mm diameter to achieve spread patterns up to 20m wide
- Large rotor diameter gives a tip speed in excess of 40mph to give a fine shred
- Open flighted dynamically balanced rotors with our unique stepped rotor flight design for increased strength
- Rotor teeth made from hardened boron steel with 16mm bolts
Axles
- 150mm square commercial axles
- 420 x 180 mm S-Cam brakes
- 35mm diameter brake cylinders
- Large wheels provide good flotation and traction in adverse conditions
High Specification
- Hydraulic slurry door
- Torque limiting slip clutch
- Wide angle front PTO shaft
- LED lights with automatic covers
Capacity
- High cubic capacities due to flared body sides
- 4 x 16mm floor chains for lower chain wear and reduced stress on the floor drive
- 6 tooth sprockets give less sprocket wear
- 75mm diameter floor drive shafts
- 1,600mm internal body width
Quality Build
- Monocoque body enables larger tyres to be fitted without increasing transport width
- Shot blasted paint preparation
- Two pack 130 micron paint finish
NOTE: All capacities are approximate and based on in field use at 10km/h. It is the responsibility of the user to check the road legislation in their area.